Hand knitted string mini hot water bottle with an alternating red stripe detail against an off white background

Mini Hot Water Bottle | Red Stripe

£25.00
Skip to product information
Hand knitted string mini hot water bottle with an alternating red stripe detail against an off white background

Mini Hot Water Bottle | Red Stripe

£25.00

A mini hot water bottle with a simple cover, knitted from cotton string with alternating stripes of red cotton baker’s twine. Hardwearing yet comforting, it’s small enough to tuck into the small of your back at your desk, or slip into your waistband under a coat on winter walks.

Never one to have idle hands, I knit these almost daily whilst going about my life—on beaches, during car journeys, in waiting rooms and departure lounges. Where will yours be knitted?

Materials: Slight colour variation and blemishes are characteristic of unbleached cotton string and add to its charm. If there's a big difference, I'll contact you to confirm you are happy with the alternative.

Specifications:

  • Bottle: approx. 14 cm × 24 cm, 500 ml capacity. Manufactured to British Standard 1970:2012.
  • Cover: hand-knitted in the round using Everlasto no.4 Polished Cotton Twine.

The following instructions and safety warnings are sent out with all my hot water bottles.

Instructions:

To remove the cover, empty the hot water bottle, squeeze out the air and put the stopper back in place.

Roll the hot water bottle and squeeze it through the opening at the neck. It is a tight fit and will require a bit of effort to get it out, but cotton string is very hardy and will withstand a lot of stretching.

To reinsert the hot water bottle, do the above in reverse.

Cover care:

  • To retain the colour stripe and prevent colour bleeding, hand wash the cover at cooler temperatures.
  • The cover can be machine-washed, but please be aware that more vigorous washing cycles may cause the cotton to bobble or 'pill'.
  • The knitted cotton string cover may tighten when washed but can be stretched and pulled back to its original shape and size.

Safety:

  • The bottle must only be filled by a competent adult.
  • Check the entire bottle, including the stopper, for any signs of wear and tear, damage, splits or perishing before use.
  • Before first use, fill with cold water to ensure the bottle is in good condition and fills properly with no leaks.
  • Only use the bottle in its cover to prevent burns or skin irritation.
  • Fill the bottle with hot water from the tap. Never use boiling or just-boiled water from the kettle.
  • Fill the bottle slowly, taking care not to overfill. A maximum of three-quarters full is recommended.
  • Ensure the funnel is empty before firmly tightening the stopper.
  • Do not lie or sit on the hot water bottle.
  • Replace the bottle as soon as you notice any signs of damage or wear and tear.
  • It is recommended that all bottles should be replaced every two years.

You may also like